MT76X8

Minibox-Lora V1.0 Upgrade Instruction

        firmware download link: openwrt-ramips-mt76x8-MiniBox-LoRa-squashfs-sysupgrade       1. Change the PC IP       2. connect lan: Press the reset key and hold on,then power the Board ,hold the reset key more than 5S, then release. The Board IP generally 192.168.1.1 open cmd ping 192.168.1.1 -t  sure wether connection     3.upgrad by net : 192.168.1.1​  login net… read more »

Oolite V3.5 HW Instruction

Schematic Diagram: http://oolite.cn/wp-content/uploads/2018/07/OOLITEV3.5-DEV-V1.0.0pdf.pdf   PCB Diagram(PADS9.5) http://oolite.cn/wp-content/uploads/2018/07/Oolitev3.5-DEV-V1.0.0.pcb

Build Firmware For Oolite v3.5

1. Environment         Any linux 64-bits based operating system. 2. Resource preparation        Download the SDK package through : openwrt-15.05.tar        Extract the package by :tar -jxvf openwrt-15.05.tar.gz        Make sure all the dependencies are installed.        Download the mt_wifi drive package through(place drive package in the same directory with extracted SDK folder):  mt_wifi.tar       … read more »

How to update fw when luci check fw failed(Oolite V3.2)

1.Openwrt-15.05 Fw download : openwrt-ramips-mt7628-Oolite-V3.2_F-8MB-15.05_V2.0_20170912 openwrt-ramips-mt7628-Oolite-v3.2_F-16MB-15.05_V2.0_20170912 openwrt-ramips-mt7628-Oolite-V3.2_F-32MB-15.05_V2.0_20170912 openwrt-ramips-mt7628-Oolite-V3.2_F-64MB-15.05_V2.0_20170912   2.luci update fw failed: 3.Telnet to the board.   4. root@OpenWrt:/tmp# cat /proc/mtd dev:    size   erasesize  name mtd0: 00030000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00010000 00010000 "factory" mtd3: 00fb0000 00010000 "firmware" mtd4: 00115bea 00010000 "kernel" mtd5: 00e9a416 00010000 "rootfs" mtd6: 00b00000 00010000… read more »

Oolite V3.5 Upgrade Instruction

1.preparatory work Software:         Firmware – uboot.bin or openwrt.bin;         SecureCRT;         Tftp32;         WinSCP; Hardware:         Known-good Ethernet cable;         Known-good serial cable; 2. Upgrade 2.1 Serial         Verify that DUT IP and server IP in same network segment                 – For Oolite V3.5, verify that DUT IP 192.168.1.1 and set server IP 192.168.1.3;… read more »

Oolite V3.3 Upgrade Instruction

1.preparatory work Software:         Firmware – uboot.bin or openwrt.bin;         SecureCRT;         Tftp32;         WinSCP; Hardware:         Known-good Ethernet cable;         Known-good serial cable;   2. Upgrade 2.1 Serial upgrade         Verify that DUT IP and server IP in same network segment                 – For Oolite V3.3, verify that DUT IP 192.168.1.1 and set server… read more »

Sidebar