Mini Box V3.0 Upgrade

 

you can download the bin file in there

MiniBoxV3-userself-uboot minibox-v3-qsdk-2.9.095

NO.1 Perpare work
/*******************************************************************************

1.Line up the board and the PC(through network)

2.Open the secureCRT and Line the box
We choice “quick link”


3.Enter 192.168.1.1

(password default password is NULL)
Click login
Click system->backup/Flash Firmware

4.Backup the configuration
Click generate archive

 

5.Backup the system
Link up secureCRT( by telent)
Type the command:cat /proc/mtd

backup the firmware
Type the command :dd if=/dev/mtd5 of=/tmp/firmware.bin

Set the password(by LUCI)

Save
6.enter the winscp

he left side is the windows 7 system files,and the right is the Minibox v3.0 system files.
The need to update the file, download to the right of the “tmp” directory.

NO.2 Upload the firmware
/*******************************************************************************
Upload the bin you want the upgrade(like the next picture)

In the SecureCRT console,enter the “tmp” directory.
cd /tmp
mtd erase /dev/mtd5
mtd write firmware.bin /dev/mtd5

NO.3 Update the firmware & uboot by HTTPD
/*******************************************************************************

1.Press the button at least 5 seconds to get into the httpd
2.Enter 192.168.1.1

Click firmware
Choice the upgrade file


3.Start upload file
Wait at least 1 minu until the system perpare well

(You can also upgrade u-boot by httpd)

 

 

 

Comments

This post currently has 2 responses

Leave a Reply

Your email address will not be published. Required fields are marked *

Sidebar