Oolite V2.1 Upgrade

Oolite V2.1

Contexts

1 Backup

2 Upgrade

 

Preparatory work:

(1)connect : The Board IP generally 192.168.1.1,than sure PC ip and the Board IP in the same gateway, open cmd ping 192.168.1.1 -t  sure weather connection

 

(2)(if the Board has the Serial)Serial Connection:the Red wire don’t connect,the Black wire connect ground,the Green wire connect TX,White wire connect RX

1.Backup 

(1)Backup the current configuration by net : 192.168.1.1

Turn on the Board and login net : 192.168.1.1  Click Generate archive

    

(2) Backup by mtd and winscp

     1. input cat /proc/mtd sure uboot,firmware zone

       

      2. input dd if=/dev/mtd0 of=/tmp/uboot.bin the same to do firmware ,art

     

(2) login 192.168.1.1net and register password

    

(3)Open winscp

   Password:you register previously

   

Download the file you previously  backup

 

2 Upgrade

  2.1 Upload by httpd

  (1)Turn on the power again,count before zero press any key enter :UBOOT>

     

(2)input httpd

 

Tips:if your Board don’t have serial port you can turn  on power and long press reset key for 6 second,then login 192.168.1.1  net

(3) login 192.168.1.1 net, choice Uboot and firmware you want​

Chick UPLOAD

When you see console like below,it is done

2.2 Upload by tftp

  (1)put tftp and the file you want upload in the same Directory

   

  (2)Enter into Uboot> input setenv serverip “you pc IP” for example my PC ip  is 192.168.1.184

    

  (3)tftp 0x80060000   AR9331_U-Boot_Oolite-v2-v20170727.bin (uboot’s file name)press ENTER key

   

  (4)erase 0x9f000000 +0x10000 press ENTER

     

  (5)cp.b 0x80000000 0x9f000000 0x10000

    

  (6)Uoload Firmware: tftp 0x80060000 Oolite-V1.0-qsdk-qca-ath9k-V1.0.4-0x3d0000.bin

     

  (7)erase 0x9f020000 +0x3d0000

    

  (8)cp.b 0x80060000 0x9f020000 0x3d0000

   

2.3 Upgrade by winscp + mtd

   (1)Open  the power supply,wating for system start to finish. Set “root” password​

       

   (2)Open the “winscp” software in windows 7

     

The left side is the windows 7 system files,and the right is Oolite V1.0 system files. The need to update the file, download to the right of the “tmp” directory

(4)In the SecureCRT console,enter the “tmp” directory

cd /tmp

mtd erase /dev/mtd5

 

(5)mtd write Oolite-V1.0-qsdk-qca-ath9k-V1.0.4.bin /dev/mtd5

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Comments

So empty here ... leave a comment!

Leave a Reply

Your email address will not be published. Required fields are marked *

Sidebar