Minibox-Lte V1.0 Upgrade

Contents

 1 Backup

 2 Upgrade

 

Preparatory work:

(1)connect lan: The Board IP generally 192.168.1.1,than sure PC ip and the Board IP in the same gateway, open cmd ping 192.168.1.1 -t  sure wether connection

1.Backup

(1)Backup by net : 192.168.1.1​

Turn on the Board and login net : 192.168.1.1, by chick and backup the current configuration files

(2) Backup by mtd

  1. input cat /proc/mtd sure uboot,firmware zone 

2. input dd if=/dev/mtd0 of=/tmp/uboot.bin (The same to the kernel ,rootfs,firmware,art)​

(3)login 192.168.1.1net and register password

 

(4)Open winscp

 Password:you register previously

Download the file you previously you  have backup

2.Upgrade

  1.Upgrade by 192.168.1.1

     turn on power at the board when enter the system login  192.168.1.1

at the red arow choice the image you want then Flash image

2.Upgrade by httpd

   (1)Turn on the power again,when it count before zero press any key enter :UBOOT>

  

 

(2)input httpd

Tis:if your Board don’t have serial port you can turn  on power again and long press reset key for 6 second ,then login 192.168.1.1   

(3) login 192.168.1.1 net, choice Uboot and firmware you want,Then select the corresponding button to upgrade.

Chick UPLOAD

When you see console like that,it is done:

Upgrade by tftp

  3.Upgrade by tftp

     (1)put tftp and the file you want upload in the same Directory

      

(2)Enter into Uboot> input setenv serverip “you pc IP”this ip with Board ip in the same gateway for example my PC ip 192.168.1.184

 (3)tftp 0x80060000;ENTER

(4)erase 0x9f000000 +0x10000

(5)cp.b 0x80000000 0x9f000000 0x10000

(7)erase 0x9f020000 +0x3d0000

(8)cp.b 0x80060000 0x9f020000 0x3d0000

 3.Upgrade by winscp + mtd​

  (1)Open  the power supply,wating for system start to finish. Set “root” password

(2)Open the “winscp” software in windows 7

The left side is the windows 7 system files,and the right is Oolite V1.0 system files. The need to update the file, download to the right of the “tmp” directory

(4)In the SecureCRT console,enter the “tmp” directory

 cd /tmp​

 mtd erase /dev/mtd3

(5)mtd write Oolite-V1.0-qsdk-qca-ath9k-V1.0.4-0x3d0000.bin /dev/mtd3

 

 

 

 

 

Comments

So empty here ... leave a comment!

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Sidebar